Technical data

Cubit360 Specifications

Everything you need to plan your Cubit360 installation: the scanner’s physical and environmental specifications, and the computer it needs to run at full performance.

Specifications

Computer requirements

The Cubit360 requires a desktop Windows PC or a highly specific laptop. Cubit360 software must be installed on the host computer, which must meet the minimum specifications below. Macs are not supported (Windows via Boot Camp is not recommended due to graphics incompatibility).

Minimum desktop specification

Component Minimum
OS
Windows 11 (24H2 or newer)
CPU
Intel Core Ultra 7 270K Plus
RAM
64 GB or greater
Storage
500 GB minimum
GPU
NVIDIA desktop GPU: RTX 4080, 5070 Ti, 5080 or 5090 only (16 GB VRAM minimum), latest driver
Display
2560 × 1440 resolution
USB
USB 3.2 Gen 2×2 Type-C port

An internet connection is required for installation and updates. Administrator privileges are required.

Minimum laptop specification*

Component Minimum
OS
Windows 11 (24H2 or newer)
CPU
Intel Core Ultra 9
RAM
64 GB
Storage
500 GB minimum
GPU
NVIDIA RTX 5090 laptop GPU only, latest driver
USB
USB 3.2 Gen 2×2 Type-C port

An internet connection is required for installation and updates. Administrator privileges are required.

*Sourcing the correct laptop can be challenging. We have pre-built a correctly specified laptop for you to buy from Overclockers.

Installation notes

Not sure your computer qualifies?

Our team can check your setup before installation day.

Cubit360 scanner specifications

Item Specification
Dimensions (scanner)
170 × 170 × 200 mm (cube shaped; visor protrudes 30 mm)
Weight
1.4 kg
Protection class
Class III (ELV)
Protection
Ordinary equipment (no protection against ingress of water). Closed unit; minimises ingress of dust but not water.
Duration of operation
Intended for continuous operation in normal laboratory use
Type of system
Desktop. Intended for use in a fixed, dedicated area; not intended for portable use.
Port
1 × USB 3.2 Gen 2×2 Type-C
Voltage
5 V
Area of use
For indoor use only. Working area must be stable, clean and dry. Avoid exposure to extremely bright light during use.
Operating ranges (environment)
Temperature: 18–27 °C
Humidity: 30–75% (non-condensing)
Altitude: up to 2,000 m
Storage & transport
Temperature: 0–40 °C
Humidity: 20–80% (non-condensing)
170 × 170 × 200 mm

Compact desktop footprint

1.4 kg

Scanner weight

USB 3.2 Gen 2×2

Single Type-C connection

5 V · Class III

Extra-low-voltage operation

Mimetrik — Copy Denture Workflow
|
Cubit360 — Copy Denture Workflow
Step 1 / 1